[How is it used?
I have a BirdCity125ABS with the Handlebar Cover in the winter.
Thin gloves are required to ensure maneuverability.
The combination of Handlebar Cover and Grip heater (COTA ツ) was reputed to be the best.
I installed the Grip heater this time.
Was the one you received as per Image?
As you can see in the image, it is as thick as a normal Grip and I am very happy with the Large!
Was the installation difficult?
I was worried that even I, a Custom beginner, would be able to do it.
I watched a few installation videos on Youtube and it looked like I could do it, so I did the Challenge!
Removing the existing grip was also surprisingly easy.
There was nothing difficult about fitting and wiring (just SnapSnap and fit).
It looks like a smaller amount of Grip bond would be good.
As a result, I was able to install it without any problems!
How was your experience with it?
It's already too hot for the three levels of high, so I recommend using it on medium or low.
[Included Parts:were they on?
Harness and Bond need to be prepared separately.
[Was there anything that disappointed you?
Not just as expected, but more than expected.
Other items that would be helpful
Watch the installation video on Youtube, it's easy!
Harness varies depending on the model and year, so it is better to check beforehand.
- Instock
124.36 EUR (21,450 JPY)
Informazioni sulla Consegna
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
MT-09A
17-21 (BS2N)* A separate wire lead (part number:Q5K-YSK-001-U48) is required for installation.
-
MT-10
17-21 (B676)* A separate wire lead (part number:Q5K-YSK-001-U52) is required for installation.
-
MT-10
17-21 (B67R)*Wire lead (part number:Q5K-YSK-001-U52) is required for installation.
-
TRICITY125
15-16 (2CM9)*A separate wire lead (part number:Q5K-YSK-001-U50) is required for installation.
Vedi Tutto
YAMAHA
Product detail
[Manufacturer code]Q5K-YSK-063-Y42
**Quando si utilizza lo scaldamuscoli, è necessario indossare i guanti.
*Non utilizzare lo scaldamuscoli con l'impostazione di uscita alta quando la temperatura esterna è superiore a 20°C.
*Se le impugnature sono usurate o rotte, smettere di usare lo scaldamuscoli e sostituire le impugnature.
*È necessario un cavo separato.
*Preparare separatamente l'adesivo per l'impugnatura sinistra sul manubrio..
Confortevole e facile da afferrare nei mesi invernali!
Progettato specificamente per i veicoli Yamaha per una facile installazione senza modificare il cablaggio del veicolo.
[Descrizione del prodotto]
Progettato specificamente per i veicoli Yamaha per una facile installazione senza modificare il cablaggio del veicolo
L'impugnatura riscaldata di diametro più piccolo del mondo
L'elemento riscaldante in acciaio inossidabile che si riscalda in modo uniforme raggiunge un'elevata durata..
Semplici impostazioni dell'uscita a 3 stadi a pulsante: Hi, Mid e Lo (ogni livello di uscita può essere modificato in incrementi del 10%)
Regolazione automatica dell'uscita del riscaldatore in base alla tensione della batteria.
Design affidabile con protezione della batteria.
Attenzione
* Qualora ci fosse un manuale delle istruzioni, sarebbe in giapponese.
MODEL PAGE LINKS
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY125 (MW125)
- TRICITY 155
- TRICITY 155
- TRICITY 155
- TRICITY 155
- YZF-R7
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- XSR700
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-10 (FZ-10)
- MT-10 (FZ-10)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Recensioni dei Clienti
Reviews with image
Fits:YAMAHA XSR700 22, YAMAHA Tricity155 , YAMAHA TRICITY155 16-21 (BB8H)*Wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB8B)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB83)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation.
Feb 16, 2021
Fits:YAMAHA XSR700 22, YAMAHA Tricity155 , YAMAHA TRICITY155 16-21 (BB8H)*Wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB8B)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB83)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation.
Jan 21, 2021
I chose it because I wanted the peace of mind of OEM
The thickness of the Grip is almost the same as that of the NORMAL, and the entire Grip is warm without unevenness in the heat generation area.
Rubber grip for wear protection (Heat Shrink Tube) Protected with
With the Handlebar Cover, Winter Gloves are not required when the temperature is around 0°C.
The Switch attaches to the Mirror mount so it comes out of the Handlebar Cover.
If you're using a Handlebar Cover that doesn't allow you to easily insert or remove your hand
Other Brand Product with integrated Switch and Grip is better.
Wiring processing is troublesome (Or prepare a Connector) If you have any questions, please feel free to contact us.
YAMAHA Yamaha Y's GearGrip Heater Wire Lead Big Scooter
Fits:YAMAHA XSR700 22, YAMAHA Tricity155 , YAMAHA TRICITY155 16-21 (BB8H)*Wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB8B)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation., YAMAHA TRICITY155 16-21 (BB83)*A separate wire lead (part number:Q5K-YSK-001-U54) is required for installation.
Nov 5, 2018
Overall, 100 points perfect score.
I attached it to Bird Steey 125. Installation was also easy, I completed in about an hour.
Temperature is also hot in MAX, this, November. It's pleasure in midwinter performance.
New Custom Articles
