[How is it used?
Installed on GROM JC92.
Was the one you received as per Image?
Yes.
The texture and accuracy was excellent, just like Image.
Was the installation difficult?
When installing
? Rear wheel removal
? Rear brake removal
two points occur.
If you have a Level that can do this work without difficulty, the difficulty level is not too high.
On the other hand, I don't have the confidence to do the work in this area, the tools to do (Rear stand etc.) If you don't have one, it's better to leave it to a specialist shop.
How was your experience with it?
No problem at all
I was able to install my Brembo Caliper with no complaints, good accuracy and good quality.
[Included Parts:were they on?
Yes.
Everything I needed for installation was included.
I've used various manufacturers' rear caliper supports, and the one that came with this product is the most helpful Instruction Manual I've ever seen. (*This is my personal opinion)
I didn't have any trouble at all with the installation because the installation Torque values are well documented.
[Was there anything that disappointed you?
Not for this product.
If I had to guess, I'd say that the Grom is not easy to maintain.
65.36 EUR (11,288 JPY)
Informazioni sulla Consegna
This item is discontinued.
FITMENT
-
GROM
(JC75-1000001-/JC92-1000001-)
-
GROM
(JC61-1000001-/JC61-1300001-)
-
MSX GROM
(MLHJC92)
-
MSX125SF
Vedi Tutto
HONDA
Product detail
[Compatibilità]
per pinze Brembo 2P
[Materiale]
supporto : Lega di alluminio lavorato
Superficie : Alluminio anodizzato
*- La pinza Brembo opposta 2P (20-6951) deve essere acquistato separatamente.
- Il bullone banjo deve essere sostituito.
- Quando si usa il tubo del freno posteriore di serie
- Bullone banjo (M10 x P1.0) (con 2 rondelle di tenuta)00-07-0079
- Per installare questo prodotto avrete bisogno di pinze Brembo 2POT (20.6951 o 20.B852.10 passo di montaggio 84mm, pistone grande).
- Bulloni banjo stock (passo 1.25) non può essere usato sul lato della pinza a causa del diverso passo della filettatura. Se si desidera utilizzare il tubo di serie, si prega di acquistare il bullone a banjo M10 passo 1.0 separatamente. Il bullone del banjo di SP Takegawa :00-07-0079(Rosso) / 00-07-0096 (Oro)
- Raccomandiamo l'uso del tubo a treccia in acciaio inossidabile di SP Takegawa per le pinze Brembo. Per GROM JC61-1000001~1299999, MSX125 :06-08-0197/06-08-0201Per GROM JC61-1300001~ / JC75-1000001~, MSX125SF :06-08-0201Per GROM JC61-1300001~ / JC 75-1000001~, Per MSX125SF :06-08-0197non è applicabile perché interferisce con il parafango posteriore.
- Il liquido dei freni non è incluso in questo prodotto. Si prega di acquistare il liquido dei freni separatamente. (DOT4. (BF-4) o superiore)
- Il colore dei prodotti in alluminio anodizzato può sbiadire nel tempo..
[Componenti]
Staffa della pinza x 1
Vite a testa cilindrica per flangia (8x20) x 2 (00-00-0829)
Vite a bussola (4x5) x 1 (00-00-0583)
Chiave inglese esagonale (2mm) x 1
[Documenti]
Manuale :giapponese
[Catalogo online]
Catalogo online di SP Takegawa (Giapponese).
[Descrizione del prodotto]
Kit di staffe per l'installazione di pinze Brembo 2P sui dischi posteriori di serie.
Installando le pinze opposte 2P di Brembo, è possibile ottenere una forte potenza di arresto.
Installando la pinza opposta 2P di Brembo e la staffa della pinza posteriore in alluminio lavorato di SP Takegawa, è possibile migliorare il senso di personalizzazione della sospensione.
Inoltre, questa staffa è dotata del sensore di velocità di SP Takegawa.
La staffa è in alluminio lavorato e anodizzato sulla superficie.
Compatibile con il tubo del freno posteriore di serie e con il tubo a rete del freno posteriore di SP Takegawa.
Attenzione
* Qualora ci fosse un manuale delle istruzioni, sarebbe in giapponese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Recensioni dei Clienti
Reviews with image
Fits:HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
Nov 21, 2021
If you want a brembo, go for it!
Fits:HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
May 6, 2021
It can also be used with JC92.
I'm using it with the new Crab.
It may vary from individual to individual, but I was able to get Center by popping it on.
The original bracket also has a gap between the claws and the Swing Arm.
It would be good to eliminate the rattling with Rubber or Gold stuff.
Fits:HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
Installed on: HONDA MSX125 (GROM)
Jul 24, 2018
使用车型：HONDA MSX125 GROM 2017后轮改brembo 34mm双活塞卡钳的缘故，是不能直接安装原车上的所以必须购买的转移码才能链接在原车上，材质方面铝合金，很轻！它适用于MSX125后轮改装任何品牌34MM安装孔距的对二卡钳Vehicle model: HONDA MSX125 GROM 2017The rear wheel is changed to the brembo 34mm double piston caliper. It cannot be installed directly on the original car.Therefore, the transfer code that must be purchased can be linked to the original car. The material is aluminum alloy, which is very light!It is suitable for MSX125 rear wheel modification of any brand 34MM installation hole distance two calipers(translated by Google Translator)
View DetailFits:HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
Jul 8, 2016
If you are five speed, you can install Speed ??sensor!
It is installed in Grom 's 181 cc full Custom.
Since Mission is five speeds of Mukawa river, Speed ??sensor is taken out from Rear.
In order to replace the Rear caliper, I searched on the site of Wei Big's site, and as a thing that can install the Speed ??sensor, I decided to Caliper support of the same Takekawa.
Caliper is Beringer 2p, it's a little bit small but Cut-out is wonderful, it is also a part I want to show.
This Megawa's Support is a type with Caliper on the upper side, so the presence of Beringer stands out better than the Type attached to the lower side.
Support making and texture are satisfied with Large at the highest Rank.
Instruction Manual As easy to install as street, feel like running Brake squeal etc etc. Nothing very Smooth and Brake has become effective as well.
I attach it to Screw of each part using Lock tite.
New Custom Articles
