- Offerte
- NUOVO
- Instock
5.45 EUR (940 JPY) 5.8 EUR Save 6%
Informazioni sulla Consegna
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
CL500
23
-
CL250
23
-
CB400SF
14-22
-
400X
16-22
Vedi Tutto
HONDA
Product detail
●Throttle sleeve without protrusions that interfere with grip replacement
●No need to cut the ribs, shortening the time required to replace grips
●Throttle spacer included to reduce friction between the switch box and grip
●Recommended grip length: Open-end 123mm (for closed-end grip, 2-4mm longer is recommended)
**HOTGRIP Heavy Duty Built-In 4SN (part number: 10154/45851) can be installed.
*The dimensions shown are for design purposes only.The above values may be slightly different depending on the individual manufacturing process.
*Depending on the model and grip length, some modifications such as relocation of the switch housing or sleeve cutting may be required.
*Measure your stock throttle sleeve and select a throttle wire wrapping diameter close to the stock size.
*Clearance and throttle position are different from stock.
*The outer diameter of the grip mounting area is approx. 0.2mm smaller than that of the stock parts of each manufacturer measured.Therefore, the stock grips may not be usable depending on the model.
*We recommend applying a small amount of grease to the outer circumference of the handlebar to eliminate contact noise with the handlebar when idling and to improve throttle operation.
*There is no grip baffle.When installing, use optional GripBond (Part No.: 93129 / 96484) and secure them with wire properly.
*Winding diameter may differ from that of the stock for some reference compatible models.No problem in use.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons..
Throttle sleeve without ribs that prevent grip rotating.
There are no ribs to remove, which is useful when installing custom grips.
Includes throttle spacer for smooth throttle operation.
The stock sleeves are available in white, gray, or black, depending on the model, but we have chosen the less conspicuous black color.
Recommended grip length: 123mm (For open-end grip.When using closed-end grips, use those that are 2-4mm longer.)
Attenzione
* Qualora ci fosse un manuale delle istruzioni, sarebbe in giapponese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Recensioni dei Clienti
Non ci sono Recensioni dei Clienti
New Custom Articles
