23.32 EUR
(3,800 JPY)
18.68 EUR
(3,045 JPY)
(Sconto di 20% )
4 (6 Recensioni)
Very Good
[Webike Monitor] Since the sheet got hot when
summer came, it stuck on the sheet flesh side at the trial.Heat decreased sharply as
expected and the number of times of having floated the hips and applying a running wind during a run became fewer.
[Webike Monitor] Since the sheet got hot when
summer came, it stuck on the sheet flesh side at the trial.Heat decreased sharply as
expected and the number of times of having floated the hips and applying a running wind during a run became fewer.
After sticking, it ran as 300 km, but it did not separate and fall.In the direction of SS riding to which there is almost no crevice between the
Engine and a Frame, and a sheet gets hot, it is recommended.
Reviews For DAYTONA Nastro Paracalore per Copulino (Tipo Adesivo a Parte Retro) From Other Webike User
Very Good
assistanceThis time I used it in place of the Exhaust Joint gasket.
It is useful for stopping leaks and contact protection where heat can enter.
I just wish it was a little less expensive...
It's 550 degrees Celsius, so what does it matter?
I think it is useful for people who are messing with Exhaust System.View Detail
Very Good
It was helpfulI used it as a heat countermeasure for the fuel tank of oil-cooled 1100
The Large Modified Engine is a hot motorcycle, and the inner thighs are cold in the summer when there is traffic The more you burn, the hotter the Tank gets
There is a standard ThermoShield on the back of the tank, but it wasn't enough We'll clean it up and put this product on it
We overlapped them and applied them to an even larger area
The result is that it blocks more heat than I thought it would, and the Tank gets hotter, but burns like it used to It's not as good as
I'm happy with the easy way to improve the shortcomings of the productView Detail
Excellent
Since its W changed the location a little as it is pure although it had exchanged the muffler for BEET, when side stands are raised, it interferes with an assist bar,
Since it was [ give / since it hits Kern, Kern and a muffler exhaust pipe portion wheSince its W changed the location a little as it is pure although it had exchanged the muffler for BEET, when side stands are raised, it interferes with an assist bar,
Since it was [ give / since it hits Kern, Kern and a muffler exhaust pipe portion whenever it raises a stand, a crack does not take lessons from an exhaust pipe, or / damage ] uneasy, as a result of applying a trial-and-error method to many things, it purchased here.
If it winds one like a photograph and carries out, the contact sound to worry was lost and I can be using it satisfactorily also in respect of a heatproof.
Appearance is not worried so much in itself, either.
It is larger that problem solving was able to be carried out above all.
If it is this way of winding although various ways of winding were adopted and being seen, it will not have separated a rainy weather run or for a long period of time also for Kon, either.
I thought that it is broad, and one was a thing to have since there is also quantity.View Detail
Most Viewed Reviews Of DAYTONA Other Tapes
Very Good
assistanceThis time I used it in place of the Exhaust Joint gasket.
It is useful for stopping leaks and contact protection where heat can enter.
I just wish it was a little less expensive...
It's 550 degrees Celsius, so what does it matter?
I think it is useful for people who are messing with Exhaust System.View Detail
Very Good
It was helpfulI used it as a heat countermeasure for the fuel tank of oil-cooled 1100
The Large Modified Engine is a hot motorcycle, and the inner thighs are cold in the summer when there is traffic The more you burn, the hotter the Tank gets
There is a standard ThermoShield on the back of the tank, but it wasn't enough We'll clean it up and put this product on it
We overlapped them and applied them to an even larger area
The result is that it blocks more heat than I thought it would, and the Tank gets hotter, but burns like it used to It's not as good as
I'm happy with the easy way to improve the shortcomings of the productView Detail
Excellent
Since its W changed the location a little as it is pure although it had exchanged the muffler for BEET, when side stands are raised, it interferes with an assist bar,
Since it was [ give / since it hits Kern, Kern and a muffler exhaust pipe portion wheSince its W changed the location a little as it is pure although it had exchanged the muffler for BEET, when side stands are raised, it interferes with an assist bar,
Since it was [ give / since it hits Kern, Kern and a muffler exhaust pipe portion whenever it raises a stand, a crack does not take lessons from an exhaust pipe, or / damage ] uneasy, as a result of applying a trial-and-error method to many things, it purchased here.
If it winds one like a photograph and carries out, the contact sound to worry was lost and I can be using it satisfactorily also in respect of a heatproof.
Appearance is not worried so much in itself, either.
It is larger that problem solving was able to be carried out above all.
If it is this way of winding although various ways of winding were adopted and being seen, it will not have separated a rainy weather run or for a long period of time also for Kon, either.
I thought that it is broad, and one was a thing to have since there is also quantity.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
IL PIÙ GRANDE
NEGOZIO ONLINE IN GIAPPONE
BUONI SCONTI ESCLUSIVI,
OFFERTE, AFFARI
RAPIDE & AFFIDABILI
SPEDIZIONI