Because GYROUP's loading platform was quite heavy but only fixed with M8 Bolt 4 pieces, from when it was changed from 8 Mark's Hexagon Bolt to Nameless Set bolt, it also doubles as a theft prevention by special shape.
Although Screw was about 10 mm longer than OEM, I was worried that it would not interfere, but I was able to fix the loading platform firmly with high strength and wider Flange without interfering in particular.
As a disadvantage, because the installation tool is a hexagon of 8 mm because of the strength of Bolt, it is difficult to wear Torque wrench and it is likely that the hexagonal part of the tool will be frozen unless Torque is applied carefully when tightening.
It would be nice if you could use an on-board tool if it would be at least 12 mm.
Exhaust System exchange and set, surely purchased. Except for this, I can not think of any further Exhaust System anti-theft measure (*^^*) However, I want more room for Length selection.View Detail
"I purchased for the theft prevention of a muffler (MAC-MRD). It is a mechanism in which it idles even if try to gather and turn the head forcibly with pliers etc. with the bolt which cannot turn, if there is no key for exclusive use. I think that the effect on theft prevention is very high. However, when using it for a silencer band, since it will separate if turned from the nut side if only the bolt is changed to this bodyguard, it is also necessary to change a nut for exclusive use. If I think so, price is severe. Although it is cheap considering being stolen, it cannot be denied that the foot is seen."View Detail
I think that it is functionally useful for theft deterrence also at appearance.
Since it thought that there should just be size deployment more with having liked you to use a stainles
It purchased to the theft prevention of an ohlins and a muffler.
I think that it is functionally useful for theft deterrence also at appearance.
Since it thought that there should just be size deployment more with having liked you to use a stainless for a raw material, they are four stars.View Detail
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the pho
Zep750+BREMBO casting It is used.
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the photograph, M10xL25xP1.5 (for BREMBO) is used for the caliper side (the bottom is an ordinary cap bolt, respectively).
Although there is little sizing, they are the goods considered well.View Detail
IL PIÙ GRANDE
NEGOZIO ONLINE IN GIAPPONE
BUONI SCONTI ESCLUSIVI,
OFFERTE, AFFARI
RAPIDE & AFFIDABILI
SPEDIZIONI