28.01 EUR
(4,585 JPY)
26.75 EUR
(4,380 JPY)
(Sconto di 4% )
5 (13 Recensioni)
Excellent
I made it to Low type HandlebarI was looking for Mirror as a shorter thing, and as I was looking for, the appearance of this item and Quantity : Pair (for Left and Right) So I bought it unexpectedly because it is about 3000 yen.
OEM and Mr. made by Mr. Takekawa which I had been using up to now were types that were closed by GRUGRU for each Mirror, so adjustment of the final angle was troublesome.
Since this product is tightened with Bolt which is different from Mirror Body, it is only necessary to turn Bolt so that it does not move after determining the angle, so it was very easy to work.
Although the mirror surface seems a little small compared to the previous one, I thought the visibility was improving in reverse..
It is recommended not for OEM's gruesome Mirror but for those who want to show it to Race ish for a moment.
Bolt also comes with 8 mm x 2, 10 mm x 2, 8 mm and 10 mm Opposite Thread Screw 1 each, so you do not have to worry about Screw but it's durable Large.
Reviews For HURRICANE V Blade Mirror TYPEII From Other Webike User
Very Good
CBR250RMirror replacementChanged from OEM Cowl mount to Handlebar Mounting in hopes of increasing visibility range.
The result is almost satisfactory, with less reflection of my arms, etc., and a wider visible range.
Handlebar has already been changed to HURRICANE Pipe handle.
The base of the Mirror rests on the Cowl in the fully locked state, but the Cowl bends, so you can use the Mirror without modification.
Handlebar lockable.
With the loss of Mirror from Cowl, has it Refreshed a bit in terms of design?View Detail
Excellent
Compact.It is easy to install with two sizes and an Opposite Thread Screw. It is easy to install. The width has also been made narrower, making it perfect for narrow scenes. It is also suitable for spare parts because of its good visibility and cost performance.View Detail
Excellent
Slim.I am happy with the low price and solid construction, perfect as a Spare. The width is also slim, so tight spaces are no problem.View Detail
Excellent
Demon Slipping Spec.It's been raining so I've been working on it. It's the same width as the OEM Bar End, so it's easier to slip through. I'm not sure if this is a good idea or not, but I think it's a good idea for people who want a compact mirror but don't want it to be hard to see. The best point is that the mirror doesn't shake anymore even with the strong vibration of VTwin.View Detail
Very Good
A good Mirror that goes with any motorcycle in a safe mannerI installed it on my Yamaha Max star125.
Edge is smart and it's MT09 OEM Mirror style.
It's a HURRICANE, so the quality is good because it's a solid manufacturer.
Also, this Mirror even comes with screws that correspond to the M8 and M10 screws and reverse screws, which is nice.
Visibility, unfortunately, did not feel so good.
It's much better than nothing, though.
There is no lock by nut. When it's loose, it will be plunged all at once.
Well, considering the price, it's a good enough Mirror.
View Detail
Most Viewed Reviews Of HURRICANE Mirror
Very Good
mirrorsperfect for my bike. Looks better than stock. ThanksAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail
Excellent
HURRICANE TurtleI used the tanax rearview mirror and the Hurricane separation handle before, it didn't look good. Now I replace the Hurricane's rearview mirror with a good view, and the overall coordination is very good.View Detail
Very Good
Beautiful but may not suit your bikeFinding right mirrors can be a headache. These mini mirrors are beautiful. The lens are blue and do make your bike luxurious. However you would find the viewing angle too narrow especially if your bike handlebar is on the shorter, closer side. Cruisers with long, forward handlebar will find them ok. The image does shake and blur but again, depends a lot on your bike.One thing I find uncomfortable is once you decide where the mirror would be on the stem and tighten the screw, the screw will eat into the stem's metal creating a deep cut mark which can be ugly. So you only have once chance to decide the position of the mirror. Once tightened, you shouldn't move it again.View Detail
Excellent
Bigger than I thought.Since it's advertised as a mini mirror, I was a bit worried that it would turn out tiny or feel fragile. The actual mirror is surprisingly solid, weighs as a quality mirror should, and the size is just perfect. The blue mirrors are nice and harder to find these days. I do not know why. Maybe they no longer pass safety inspections in Japan? I do not know. I'm happy I bought this one while we still can. One of the best purchase on webike. Thanks.View Detail
Very Good
CBR250RMirror replacementChanged from OEM Cowl mount to Handlebar Mounting in hopes of increasing visibility range.
The result is almost satisfactory, with less reflection of my arms, etc., and a wider visible range.
Handlebar has already been changed to HURRICANE Pipe handle.
The base of the Mirror rests on the Cowl in the fully locked state, but the Cowl bends, so you can use the Mirror without modification.
Handlebar lockable.
With the loss of Mirror from Cowl, has it Refreshed a bit in terms of design?View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
IL PIÙ GRANDE
NEGOZIO ONLINE IN GIAPPONE
BUONI SCONTI ESCLUSIVI,
OFFERTE, AFFARI
RAPIDE & AFFIDABILI
SPEDIZIONI