13.81 EUR
(2,250 JPY)
12.79 EUR
(2,084 JPY)
(Sconto di 7% )
4 (5 Recensioni)
Very Good
It's inconspicuous … it's transparent …I use it for the Heel Guard in my Off car
Material:The Aluminum Heel Guard makes white shoes and boots look black I wanted to keep the texture of aluminum, so I put "Clear" on it Use
I used it for CBR
I don't expect much in the way of durability, but I'm happy with its effectiveness for the purpose
Reviews For TANAX Protector Seat Roll MF-4684 From Other Webike User
Excellent
To protect TankI pasted it on Tank's scratch prevention.
I did not want Tank Pad to be so conspicuous, so I bought this product.
Since it is a Material that stretches, some aspects can also be pasted, but M is split and pasted to make it easier to paste.
I found it a good feeling that it is inconspicuous that I pasted it a little away.View Detail
Very Good
[Webike Monitor] If it rides on a Motorcycle by the
Leather pants (black), the portion equivalent to which a Tank and a knee are will become dirty black.This product was found when it was searching with whether there are any good products, since havi[Webike Monitor] If it rides on a Motorcycle by the
Leather pants (black), the portion equivalent to which a Tank and a knee are will become dirty black.This product was found when it was searching with whether there are any good products, since having cleaned each time was troublesome.Although the ストンプ Grip was also a candidate, since what it is powerful and cannot remove an adhesive bond was written, this product was used this time.When a product is purchased and stuck, the place stuck more than it considered is not conspicuous.
However, it was difficult, and attachment tried to stick as it is at first, and went wrong.It may be the cause that the Tank of a MONSTER S2 has many curved surfaces as for this.Next, when the Tank was wet and stuck with the water in which neutral detergent was included, it was able to stick finely.Although it is not only this product, if the person unfamiliar to attachment works, will fail, or air bubbles enter, or such difficulties exist.Since the half of this product was used by a part for Tank one side, the additional purchase of the same thing is carried out by the first failure.Moreover, in left-hand side, many air bubbles enter.
Although written also in advance, it is not truly conspicuous when it is able to stick finely.Even if it sees nearby, it does not understand other than a boundary line.Although it was used for a while, a difference is not felt for a Grip even if it compares with Saki who felt uneasy and who it is easy to slide, and does not necessarily become and sticks.About it being difficult to stick, when sticking on a part with few small area or curved surfaces, it is thought by the direction which is used to work whether it is satisfactory.View Detail
Most Viewed Reviews Of TANAX Stickers / Decals
Excellent
Is goodI put it on to prevent scratches and scuffs caused by the attachment of Net and luggage, and also to prevent scratches on the fuel tank and Seat interference area.
[Color] It is clear, so it is not noticeable and will not detract from your motorcycle's design. It provides good protection.View Detail
Very Good
I use it every year.I use a magnet type tank bag for long touring, but the tank bag moves a little when it touches my body during getting in/out of the car and driving.
Is it good for the painted surface to leave it on? I think it is not good for the painted surface, so I use it every year around October at the end of long touring. The period of use is about 7 months for a large car.
I put it up in the garage at 15℃ or higher with the heater on, so that the seat is soft and the tank is not cold.
The large size is 90×60, so it is not so difficult to apply.
? The peel can be removed without much difficulty by lifting the corner.
After use, the tank is in good condition, with no wound on the tank and no adverse effects such as discoloration on the paint.
The product comes in one 180×120 and two 12 The product contains one 180×120 and two 12×90, which is very useful because we use four 90×6×90 in the Tank Bag. The product is very useful because it can be used for exactly two seasons since four 90×6×0 sheets are used in the Tank Bag.
Easy to use and good product for preventing scrubbing Wound.View Detail
Very Good
Where it might get scratched.[How is it used?
When I replaced the Handlebar, the lever seemed to hit the inner cowl, so I put it on to prevent scratches.
How was your experience with it?
It is highly durable, scratch resistant and will not peel off even after repeated car washes.
I think that it is convenient to buy it if you want to keep it as clean as possible because there are a lot of usages such as the prevention of the scratch of the Tank when Tank Bag is used and the prevention of the rubbing of the luggage fixation string.
[Points to note]
There are two types, glossy and non-glossy, so you should buy the one that is less noticeable to match your motorcycle.
Be sure to degrease well before applying.View Detail
Very Good
I'm keeping the face of the exclusive.It is used for the car body Left Side which tends to be damaged by jeans in the place where Seat bag and Tail cowl rub and push walking.
It is a relatively thick Seat with high transparency.
It's soft, so it tracks reasonably well and stretches a bit if you pull on it.
The adhesive strength is relatively strong, so it won't come off by itself, and if you want to remove it, you can do so without leaving any adhesive residue.
It will protect against frictional scratches such as scuffs on the seat back and tail cowl.
On the other hand, Scratch system scratches such as scratching with hard objects may not be able to protect the product because this product will tear.
I recommend 3M's Die KnockSeat for those areas.
(For better or worse over there, Material:Carbon Style, though)
By the way, it is convenient to have Masking tape to mold and apply this product to Beauty.
? Put masking tape on the part of the car body that you want to protect.
Write the type on the masking tape
? masking tape to the surface of this product.
? Cut to size
The moulding is completed with
This product can be reapplied a little at a time, so you can take a shot at it.
If you are unsure, use water paste.
Since Seat is colorless and transparent, be careful of fingerprint adhesion and air bites on the adhesive surface.
In general, Seat is easy to use as a Protector.
It is not so expensive, so you can try to put it on the part you are worried about once.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
IL PIÙ GRANDE
NEGOZIO ONLINE IN GIAPPONE
BUONI SCONTI ESCLUSIVI,
OFFERTE, AFFARI
RAPIDE & AFFIDABILI
SPEDIZIONI