Come conciliare i temi contrastanti dell'"efficienza di raffreddamento" e delle "prestazioni di protezione"?.
Ciottoli e detriti arrotolati dai pneumatici anteriori e insetti che volano ai semafori... etc
Queste danneggeranno il nucleo del radiatore, che è fatto di alette di alluminio..
L'effetto di raffreddamento si perde quando le alette vengono schiacciate, e in alcuni casi la linea dell'acqua è danneggiata, e la linea dell'acqua può essere danneggiata.
Potremmo avere una perdita di refrigerante e...
Le protezioni del nucleo del radiatore di Etching Factory sono le più resistenti del radiatore.
Abbiamo ripetuto molti test soprattutto nella gara di resistenza su strada di 8 ore in piena estate..
Il posizionamento del modello di maglia, lo spessore delle linee di maglia e il rapporto di apertura sono determinati dai feedback del pizzo.
E' ben imbottito di ku.
La parte centrale è fine e i lati hanno una maglia a maglia esagonale grossolana.
Si tratta di una piccola, fine, zona centrale al centro del pneumatico che corrisponde alla larghezza del pneumatico per mantenere i sassolini e i detriti filati dal pneumatico anteriore.
La maglia a maglia fitta garantisce una protezione affidabile.. La maglia grossolana su entrambi i lati è progettata per fornire "efficienza di raffreddamento" e "protezione".
Il rapporto di apertura è stato progettato per consentire un equilibrio di temi contrastanti..
C'è una ragione per la scelta del materiale.
Nel caso dell'alluminio o del titanio, l'unico modo per ottenere questo risultato è ridurre lo spessore (resistenza) della meshula
L'acciaio inossidabile (SUS304 0,8t) viene utilizzato per fornire la larghezza ideale della linea senza abbassare la resistenza.
realizzato in.
Il Core Guard non è solo un elemento per mantenere le prestazioni,
Ha anche l'effetto di vestirsi per mostrare la propria bellezza con disinvoltura.
Proteggere e incantare.
Siamo orgogliosi di consigliarlo per la vostra macchina..
"The question is how to reconcile the conflicting themes of "cooling efficiency" and "protection performance".
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
You risk a coolant leak
The radiator core guard of the etching factory is the most severe to the radiator
It has been tested many times mainly in the 8-hour endurance road race in the middle of summer.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
It's packed full of goodies.
・The center part is fine and both sides are coarse hexagon mesh pattern.
This is to remove pebbles and debris spun off from the front tire by the fine center of the tire width
The mesh provides a secure guard.The coarse mesh on both sides is for "cooling efficiency" and "protection performance".
The aperture ratio is designed in consideration of the compatibility of conflicting themes.
・There is also a reason for the choice of material.
In the case of aluminum and titanium, meshing can only be achieved by reducing the plate thickness (strength)
By adopting stainless steel (SUS304 0.8t) for the line width, the ideal line width is achieved without lowering the strength
Realized in
Based on the above, the core guard is not only an item to maintain the performance,
It also has a dress-up effect to casually show off your beauty.
To protect, to charm.
It is recommended with confidence for your valuable machine.