[Corporatura] 75.5X148.1X10.7mm
[Peso corporeo] 20g
[Dettagli del prodotto]
Custodia Corpo 1 set, Torx bullone 5 libri (Preliminare 1 pz incluso)
10 ammortizzatori (Quantità preliminare: 2 pz. Set incluso), O-ring Quantità: 5 pezzi. (Compreso il ricambio 1)
* I paraurti pieni compatibili con iPhoneX possono essere caricati con il caricabatterie wireless compatibile Qi.
* La ricarica è impossibile quando il pannello in alluminio è fissato al paraurti.
* Si prega di caricare con cavo Lightning originale incluso con iPhone.
* Circa 1,5 mm di spessore del paraurti L'iPhone è separato dal caricabatterie wireless compatibile Qi Esiste la possibilità che l'efficienza di carica sia leggermente peggiore rispetto allo stato di contatto chiuso.
* Inoltre, a seconda del wattaggio in uscita del caricabatterie wireless compatibile con Qi utilizzato, il tempo di ricarica varia anche in base alla tensione dell'adattatore.
* Poiché questo prodotto è in alluminio a causa della natura del prodotto, proteggerà l'onda radio in una certa misura e le prestazioni di ricezione delle onde radio potrebbero essere leggermente inferiori.
* Nel luogo in cui le condizioni radio non sono buone, le onde radio potrebbero essere difficili da ricevere. Se si stanno ricevendo normali onde radio, non ci sono problemi.
[Confermare quanto segue e confermarlo in anticipo e ringraziare per la prenotazione]
* I prodotti che coprono la parte posteriore dell'iPhone come i solidi ei pannelli in alluminio non possono utilizzare il caricabatterie wireless compatibile con Qi.
* Poiché questo prodotto è in alluminio a causa delle caratteristiche del prodotto, le onde radio bloccheranno il lato posteriore del corpo principale. Le prestazioni per ricevere le onde radio potrebbero essere leggermente inferiori.
* Questo prodotto non è fatto allo scopo di proteggere completamente l'iPhone da urti, ecc.
* Non siamo responsabili per qualsiasi danno, guasto, perdita, perdita di dati, ecc. Sul corpo principale di iPhone. Si prega di notare che non possiamo assumerci alcuna responsabilità.
* Questo prodotto è progettato in modo che la custodia non entri in contatto con iPhone a causa della resina che assorbe gli urti, ma non è progettata allo scopo di impedire completamente l'iPhone da graffi.
* Non siamo responsabili per eventuali graffi sull'unità principale di iPhone a causa dell'installazione di questo prodotto, quindi per favore comprenderlo in anticipo.
* Le specifiche del prodotto / aspetto / gli articoli in bundle sono soggetti a modifiche senza preavviso.
* Il caricatore esterno ecc. Non può essere usato.
* Si prega di riconoscere che esiste la possibilità che si verifichino problemi come il galleggiamento per film diversi da quelli consigliati da noi.
* Nel luogo in cui le condizioni radio non sono buone, le onde radio potrebbero essere difficili da ricevere. Se si stanno ricevendo normali onde radio, non ci sono problemi.
* A causa delle caratteristiche del trattamento con l'alumite, è difficile finire con lo stesso colore in ogni lotto. Lo sforzo è fatto per finire con lo stesso colore il più possibile, ma a causa del trattamento con l'alumite, le variazioni di colore sacco.
* Poiché questo prodotto è sottoposto a trattamento con alumite, il luogo chiamato contatto attraverso il quale la corrente passa non è colorato. Nel caso ci sono due posti senza colore ma non è un difetto di elaborazione.
* Le immagini del prodotto stanno cercando di renderlo il più vicino possibile al colore reale, ma il cambiamento di colore può essere percepito dal monitor del personal computer che utilizzi, l'impostazione del colore, l'illuminazione interna, la luce solare ecc...
[Body size] 75.5 x 148.1 x 10.7mm
[Body weight] 20g
[Product Components]
Case body 1set, Torx bolt 5 pcs (including 1 spare)
Shock absorber 10 pieces (including 2 spare pieces), O-ring 5 pieces (including 1 spare piece)
*The solid bumper for iPhoneX can be charged with Qi compatible wireless charger.
*Charging is not possible when the aluminum panel is attached to the bumper.
*Please charge with the stock Lightning cable that comes with your iPhone.
*The thickness of the bumper will separate your iPhone from the Qi wireless charger by 1.5mm.The charging efficiency may be slightly lower than that of the state where it is adhered.
*Charging time may vary depending on the output wattage and adapter voltage of your Qi wireless charger.
*Because this product is made of aluminum, it may block radio waves to some extent, and the performance of receiving radio waves may be slightly inferior.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
[Please read and understand the following before making a reservation]
*Qi compatible wireless chargers cannot be used with products that cover the back of the iPhone such as solid or aluminum panels.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
*We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*Please understand beforehand that we cannot assume any responsibility for any damage to iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers.
*Films other than those recommended by us may cause problems such as lifting.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.