[Quantità]1
[Dimensione]
Diametro della vite 12mm
Raggiungi 19mm
Chiave a spina 16mm
Forma]Tipo di terminale separato
Compatibile con NGK] D6EA, D7EA, D8EA, D8EA, DR6EA, DR7EA, DR8EA, DP6EA9, DP7EA9, DP8EA9, DPR6EA9, DPR7EA9, DPR8EA9, DPR7EIX9, DPR8EIX9, DCPR7E (per Harley), DCPR8EK, DCPR8 EIX e altri
*Possibile dai veicoli per la messa a punto dell'accensione.
*Non è possibile ottenere un normale sistema di accensione da un'auto.
*Disponibile a partire da veicoli con accensione a transistor.
*Non da veicoli con accensione CDI.
*Disponibile a partire da veicoli a 4 tempi.
*Dalle auto a 2 tempi ai sistemi di accensione a transistor completi sono accettabili.
*La vivace spina LGS ha un'impostazione estremamente ampia della distanza tra le spine, e ha bisogno della capacità di accensione per poterla scaricare, per cui il normale sistema di accensione potrebbe non funzionare a sufficienza.
*Si prega di notare che il tipo Brisk ZC/ZS non è compatibile con il sistema di accensione CDI.
*Tipo di resistenza (con resistenze).
*La dimensione della chiave a spina è di 16 mm, che viene utilizzata per la spina C e così via.
*Il terminale è di tipo separato, quindi si può utilizzare qualsiasi forma del tappo a spina. Il terminale è leggermente avvitato in fabbrica, quindi si prega di controllare la tenuta del terminale prima dell'installazione.
*Le viti di montaggio di 12 mm di diametro e 19 mm di lunghezza sono intercambiabili, tuttavia, è necessario verificare se c'è qualche interferenza con la testa del pistone perché la sporgenza nella camera di combustione è più lunga.
*La coppia di serraggio è di 1,3 kg-cm. Si prega di fare attenzione a non rompersi per eccesso di coppia.
BOR14LGS (NGK "D plug" size)
[Quantity] 1
[Size]
・Screw diameter 12mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] DP6EA9, DP7EA9, DP8EA9, DPR6EA9, DPR7EA9, DPR8EA9, DPR7EIX9, DPR8EIX9, DCPR7E (for Harley), DCPR8EK, DCPR8EIX etc.
*Heat value correspondence is from No. 6 to No. 8.(Confirmation of the amount of protrusion in the combustion chamber is required.)
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Resistor type (with resistor).
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.The ones with 12mm thread diameter and 19mm thread length are compatible, but they protrude into the combustion chamber longer, so it is necessary to check if there is any interference with the piston head.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.