Modelli cross-cabina e GROM compatibili con i veicoli a corrente alternata.
[Kit di conversione per lampadine a LED Bright Edge]
Un kit di conversione per lampadine a LED sviluppato partendo dal presupposto che è possibile utilizzare le lampadine a LED che simboleggiano la prossima generazione semplicemente sostituendo le normali lampadine..
La luminosità allo stato dell'arte e la riduzione dello stress sul corpo portano la pace della mente e il divertimento nella vita..
Compatibile con il tipo HS1 AC 35/35W di tipo AC 35/35W ad alta/bassa commutazione utilizzato nei minibikes.
(1) Il nostro stile unico risolve il problema finora!
L'esclusivo stile "edge" dissipa efficacemente il calore e risolve il problema di spazio dell'utilizzo di un grande dissipatore di calore, che è stato un problema con i dissipatori convenzionali. Inoltre, la struttura di tipo dissipatore di calore è suscettibile al calore esterno, ma questo problema è stato risolto! Il problema della dissipazione del calore viene risolto anche distribuendo i chip direttamente al rame, che è due volte più efficace dell'alluminio..
(2)Efficiente installazione di LED CREE ad alte prestazioni!
I LED di alta qualità di CREE, che promettono un'emissione di luce affidabile in un design aerodinamico, concentrano efficacemente la luce e forniscono una luce sufficiente a soddisfare gli standard di sicurezza..
I LED sono selezionati in base alla forma di ogni lampadina, in modo da illuminare l'ambiente circostante in modo più luminoso rispetto alle normali lampadine alogene..
Soddisfa i requisiti di sicurezza di oltre 15.000 abbaglianti e fornisce oltre 5.000 abbaglianti.
I LED a lunga durata e a risparmio energetico consentono un utilizzo prolungato e affidabile..
Temperatura di colore 5.000K e colore BIANCO FREDDO.
La commutazione alto/basso è possibile anche con il regolatore/relay.
(3)Basato sulla valvola standard! Installare senza modifiche!
Non importa quanto sia buono, non mi sento a mio agio a lavorarlo per adattarlo..
Abbiamo sviluppato questa valvola per essere installata senza alcuna modifica in base alle dimensioni della valvola di riserva.. Con il nostro originale stile di dissipazione del calore, è possibile racchiudere il relè e il controllore nel contenitore della luce mediante una sigillatura completa invece di racchiuderlo in una scatola, che ha quasi le stesse dimensioni di un normale corpo alogeno..
Pertanto, il passaggio al normale alogeno o al LED può essere completato allo stesso modo della sostituzione delle valvole..
(4) Semplice e senza problemi!
Utilizzando il rame, un metallo flessibile, come materiale principale, può ricevere in modo flessibile le vibrazioni della carrozzeria ed evitare problemi..
La struttura semplice lo rende leggero e meno soggetto a vibrazioni..
La luminosità del LED è impostata sulla base della premessa che la quantità di luce diminuirà per effetto del calore, quindi protegge la luminosità all'interno dello standard..
Models compatible with AC bikes such as Cross Cub and GROM.
[Bright Edge LED Bulb Conversion Kit]
The LED Bulb Conversion Kit was developed based on the premise that LED bulbs, which emit light symbolizing the next generation, can be used simply by replacing the stock bulbs.
State-of-the-art brightness and reduced burden on the bike body bring peace of mind and enjoyment to motorcycle life.
Compatible with high / low switchable HS1 type AC bike (AC) 35 / 35W used for minibikes.
(1) Unique style solves the problems of the past!
The unique "edge" style effectively dissipates heat generated by the heat sink and solves the space problem of adopting a large heat sink, which was a problem with the conventional type.The heat sink type was also susceptible to external heat, but this problem has been solved!The problem of heat dissipation is also effectively addressed by distributing the chips directly to copper, which has more than twice the heat dissipation effect of aluminum.
(2) Efficient installation of high-performance CREE LEDs!
The design eliminates waste and uses CREE high-grade LEDs that promise reliable luminescence, effectively concentrating their light and achieving a light intensity.
LEDs have been selected to match the shape of each bulb, making them brighter and easier to see than stock halogen bulbs.
It meets 15, 000 candela or more for high beam and 5, 000 candela or more for low beam.
Long-life, power-saving LEDs can be used for a long time with peace of mind.
The color temperature is set at 5000K for vivid illumination and COOL WHITE for luminescence color.
High / Low switching is also realized by controller / relay.
(3) Based on the stock valve! Installed without modification!
No matter how good the product is, there is always resistance to modification and installation.
The theme of the development was to install the valve without any modification based on the size of the stock valve.The relay and controller are not housed in a box but in a light case with a completely preventative sealing.
Therefore, whether returning to stock halogen or changing to LEDs, the process is completed in the same manner as bulb replacement.
(4) Simple, so it's trouble-free!
By using copper, a flexible metal, as the main material, it flexibly accepts vibrations from the bike body and prevents problems from occurring.
The simple structure also makes it lightweight and less susceptible to vibration.
The brightness is set based on the assumption that LEDs lose light intensity due to thermal effects, so the brightness within the standard is maintained.