La larghezza standard del braccio oscillante (per Monkey Hub) è la stessa larghezza (167-170mm) del braccio oscillante di serie per Monkey..
È possibile utilizzare i mozzi di fabbrica dei mozzi a disco posteriori Monkey o G-Craft Part No. 39053..
Un braccio oscillante sia per i tamburi che per i dischi..
Il braccio oscillante più popolare di G-Craft con un'ampia scelta di lunghezze!.
Spiegazione delle opzioni
[Finitura del braccio oscillante]
Finitura anodizzata nera (G-Craft #60198) +25.000 yen
Finitura Cerakote (G-Craft #60807) +30000yen
[Cos'è Cerakote?]
La Cerakote è una speciale vernice da forno e vernice a temperatura ambiente prodotta dalla NIC, attualmente utilizzata dalle forze militari statunitensi..
È stato testato per condizioni difficili ed è superiore in termini di resistenza al calore, resistenza all'usura, durata, resistenza ai solventi, dissipazione del calore e isolamento termico..
La ceramica viene schiacciata da una macchina speciale e mescolata nella vernice per migliorare la resistenza della pellicola di vernice.. Ne risulta una superficie perlata, ma il rivestimento può essere molto sottile (25 micron).
Anche il cordone di saldatura può essere lasciato senza nascondersi.
Ha la più alta adesione tra tutti i materiali di rivestimento, e non si raggrinzisce anche se è piegato..
*Si prega di attendere 3-5 settimane per la consegna normale.
Opzione: opzione cursore a catena]
Dispositivo di scorrimento catena avvitato (codice G-Craft: 60228) +1000yen
Cambiare il cursore della catena da rivettato a imbullonato.. Facile da sostituire se indossato.
[Opzione: elaborazione aggiuntiva della base del gancio dello stativo].
Lavorazione aggiuntiva della base del gancio dello stand (M6) (G Craft Part No. 60903) +3000yen
È possibile installare i ganci di supporto G-Craft o M6..
Opzione: struttura a perno]
Specifiche dei cuscinetti a perno (G Craft Part No. 60006) +3000yen
La norma cambia la parte di perno della boccola in un cuscinetto.
Migliore durata e caratteristiche di scorrevolezza.
Standard width swingarm for Monkey (for Monkey hub) swingarm is manufactured with the same width as stock Monkey swingarm (167-170mm width).
The stock Monkey hub can be used as is, and the G-Craft part number: 39053 rear disc hub can be used.
This swingarm is compatible with both drum and disc.
This is G-Craft's most popular swingarm with a wide selection of lengths.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.